Liftcart
Forget about lifting the batter tubs above your power, lower your E-plopper automatically and move it freely through the stall or bakery with this elevator cart.
The elevator cart is completely made of stainless steel with blue rubber swivel wheels of no less than 80mm so that the machine does not get stuck against uneven floor surfaces. The rear wheels are also equipped with a brake so it cannot roll away.
The elevator cart has a spindle-driven electric elevator shaft that allows you to raise your proportioner to the height you want at the push of a button. The 2 illuminated push buttons at the top of the shaft not only provide operation but also indicate the status of the elevator cart.
Through a movable sensor in the elevator you can easily set the height of your fryer so that when you elevator the machine always stops at the set height of your fryer. With the range of 31 to 113cm (bottom E-plopper) there is a height for every fryer to set.
The elevator cart can be used with an adapter or combined with the E-Plopper to connect to the optional battery.
The elevator cart comes with mounting adapter for the E-Plopper and the bolts are included for direct mounting.
Technical specifications
HxWxD | 140x68x70 cm |
Edge overhang | 31 cm |
Weight | 43 kg |
Wheel diameter | 8 cm |
Number of wheels | 4 |
Wheels with brake | 2 |
Mounting for battery | Yes |
Electrically powered | Yes |
Working height | 33 to 113 cm |
Speed | 20 cm/sec |